Discover Commercial Water Boilers
Commercial water boilers are the easy way to pour hot water in a matter of seconds. The rapid internal boiler heats the water with excellent energy efficiency, insulated storage tanks allow for several litres of draw-off capacity, and customer-facing units can be programmed with push-button presets.
Most commercial hot water boilers have an incredibly compact countertop footprint, making them ideal in small kitchens and workplace break rooms. They can also be a good choice as domestic hot water boilers for high-end interiors, and Mulmar have supplied many units for this purpose – just get in touch if you’d like to know more about this.
Which commercial water boiler is right for me?
Mulmar supply commercial boilers suitable for a variety of locations including workplaces, tearooms and customer-facing installations. Here are some of our currently available models.
Bunn H3X Boiler
The Bunn H3X Boiler is precise and efficient, thanks to its digital thermostat and Energy Saver Mode. At 22 inches tall, it’s ideal for smaller spaces, yet still offers cup clearance of around 8 inches under the spout. Output temperature can be configured between 15.6C and 100C, for a perfect beverage at any altitude.
Bunn H5X Boiler
For larger spaces, the Bunn H5X Boiler measures in at 28.5 inches tall and offers an impressive 17.1 inches of cup clearance (less any room taken by an optional drip tray). Fine temperature control again gives an output range of 15.6-100C, with a high-visibility pouring lever to ensure health and safety in workplaces.
Marco Ecoboiler T5 Boiler
The Marco Ecoboiler T5 Boiler lives up to its ‘eco’ name, with a body constructed from 95% recyclable materials. Compared with other brands, it’s 29% more energy efficient during heating and 45% more energy efficient overall. Total output of 28 litres per hour is enough for about 187 cups of 150ml each.
Marco Ecoboiler T10 Boiler
Moving on up to the Marco Ecoboiler T10 Boiler, offers the same characteristics as the T5: Output of 28 litres per hour and 95% recyclable construction. But whereas the T5 offers an immediate draw-off capacity of 5 litres, the T10 can pour up to 10 litres at a time, ideal for high-demand locations and busy break times or lunch hours.
Marco Mix PB3 Boiler
The Marco Mix PB3 Boiler is perfect for customer-facing settings, thanks to its simple push-button pouring process. A vacuum-insulated water tank cuts up to 70% of running costs, while programmable presets allow for three different temperatures and volumes to be defined in advance. Output again is 28 litres per hour, enough for 187 cups of 150ml or 156 cups of 180ml.
Do I need a commercial water boiler?
Commercial water boilers offer a range of clear advantages over standard domestic water heaters. Just some examples of this include:
• Robust construction using recyclable materials
• Programmable outputs for consistent, accurate temperature
• Insulated water tanks for energy-efficient draw-off capacity
• Full installation instructions and measurements in printable PDFs
• High throughput with minimal maintenance needed
With a variety of unit sizes to choose from, you can find a commercial boiler to fit your space, while still giving you the output capacity you need.
Why buy commercial water boilers from Mulmar?
Mulmar has over 30 years’ of experience supplying commercial kitchen equipment to businesses in catering, food service and hospitality across the UK and Ireland. We treat every customer with full care and attention, from large chain brands, down to independent tearooms and domestic consumers.
Our services don’t stop at supplying brand-name commercial boilers. We can install your new equipment, either on its own or as part of a complete kitchen fit-out. When it’s time to get your boiler serviced and maintained, Mulmar can send an engineer to take care of that too. Whatever you need, we’re a phone call away.
Frequently Asked Questions
Who are commercial water boilers suitable for?
There’s a commercial water boiler to suit almost any application where on-demand hot water is needed. Compact, energy-efficient units for domestic and small office use, right up to high-throughput commercial boilers for busy kitchens and customer-facing ‘buffet’ scenarios.
Are commercial water boilers easy to install?
Each boiler will need a power supply and a plumbed water supply. Full installation instructions are available as downloadable PDFs. Some models (e.g. Marco Ecoboilers) are factory-fitted with a 13A moulded plug, which can be plugged directly into a standard mains outlet for even easier installation.
What is your returns policy?
At the time of delivery/installation damaged or faulty equipment must be reported to Mulmar immediately for appraisal and verification of fault from the manufacturer.
Should an item be returned where the machine is not faulty, a 25% restocking fee will be chargeable and will be deducted from the credit payment.
What are your standard lead times?
Items that are in stock and do not require installation will be sent out for next working day delivery as long as they are ordered before 3pm (UK Mainland).
Generally, we need a week’s notice on equipment that requires installation but this largely will depend on engineer availability in your area so please contact us and we will do our utmost to fit your timescales.
If you require installation, the equipment can be delivered on a separate date depending on what you order.
Speak to us today
To find out more information about any of our commercial water boilers, installation and maintenance services, just ask below.